Engrave Test on VegTan Leather

Make sure the device is connected, material selected, mark the processing area and measure distance.

1. Place honeycomb and use hold downs so leather does not bend up. 
2. Select shape you want to use on the left side menu and draw one on the space→ Select and change to Engrave on your settings menu→ You can also right click on the shape and change the color before this next step→ Stay selected and go to Applications. 
3. Applications→ Material test→ Processing Type: Engrave→ Material: Leather

           X Columns- Power(%): 70max, 20min, Columns 6

          Y Columns- Speed(mm/s): 300max, 100min,columns 5

1. Select grid→ Ungroup and select outside of test→ Go to headings and only highlight/select the letters and numbers→ In Settings overview menu on the right, change to score→ Right click to change color→ Click outside of the test to see changes
2. Go to bottom left→ Click on layers and Object List→ Click on the color for engraving→ Change to 2 passes→ Click outside of test→ Click on color for score→ Change score settings to speed 50/50 power/1 pass
3. Exit out of layer menu. Highlight the whole test and Group.

Frame→ Click on the drop down menu next to the Process button→ Change Processing Path to User Defining→ toggle on to By Layer→ Scanning Path to All Together or One by One (you can see the differences for each when you preview but i used One by One)→ Exit and Process

YOU DID IT!