Report

[Laser cut and engrave,Blade cut,Screen printing] Laser Cut Star Christmas Ornament with Gold Glitter Backing — Project made with xTool P2,xTool P2S,xTool F1 Ultra,xTool M1,xTool D1,xTool D1 Pro,xTool M1 Ultra,xTool P3,xTool F2 Ultra,xTool F2 Ultra (Single),xTool F2 machine for Christmas.

Laser Cut Star Christmas Ornament with Gold Glitter Backing

Instruction

StarStacked

.xcs

Show 1 more

Application scenario

Laser processing、Blade cut、Screen printing

Machine & module

xTool P2

55W

xTool P2S

55W

xTool F1 Ultra

20W

xTool M1

5W, 10W

xTool D1

2W, 5W, 10W, 20W

xTool D1 Pro

2W, 5W, 10W, 20W, 40W

xTool M1 Ultra

10W, 20W, Cutting blade

xTool P3

5W, 80W

xTool F2 Ultra

40W, 60W

xTool F2 Ultra (Single)

60W

xTool F2

5W, 15W

Compatible xTool Machine

10W, 20W

F2 Ultra UV

10W

10W, 20W, 40W

Material used

1/8"(3mm) Basswood Plywood

122

1549

Information

      This is a two layered ornament for a Christmas tree or other decorations. For my specific version, I used a glitter gold Acrylic for the back layer and aluminum for the top layer. The specific materials used for each layer can be changed as needed. I included both the XCS as well as the SVG file.

I think that this would look really good with a brass top layer, I just had trouble with my settings. The details are pretty small depending on the specific size you choose to cut at.

Instruction

Step1: Resize

Preview

This ornament has a lot of small details, so pick a size that is appropriate to the material you are using. Then cut with appropriate settings. Make sure to resize both layers at the same time so that they will be the same size in teh end.

Comments