Report

[Laser cut and engrave] Laser Cut Wooden Angel Ornament Christmas Decoration — Project made with xTool S1 machine for Christmas.

Laser Cut Wooden Angel Ornament Christmas Decoration

Instruction

Anděl dveře

.xcs

Application scenario

Laser processing (15min)

Machine & module

xTool S1

20W

Compatible xTool Machine

10W, 20W

F2 Ultra UV

15W

80W

F2 Ultra

40W

F1 Ultra

20W

5W, 10W

5W, 10W, 20W

D1 Pro

5W, 10W, 20W, 40W

55W

10W

10W, 40W

M1 Ultra

10W, 20W

P2S

55W

Material used

1/8"(3mm) Basswood Plywood

135

1768

Information

      This elegant angel silhouette inside a circular frame is designed as a standout Christmas decoration. With a diameter of about 21 cm, it fits perfectly on A4 plywood and works beautifully as:
a large hanging window ornament,
a front door decoration,
a wall piece,
or an oversized Christmas bauble.
The detailed wings and dress cut cleanly on most diode lasers.
For double-sided use, simply mirror the design, cut it twice, and glue the pieces back-to-back. This makes the ornament look perfect from both sides – ideal for doors, windows, and open spaces.

Instruction

Step1

Description

This elegant angel silhouette inside a circular frame is designed as a standout Christmas decoration. With a diameter of about 21 cm, it fits perfectly on A4 plywood and works beautifully as:

a large hanging window ornament,

a front door decoration,

a wall piece,

or an oversized Christmas bauble.

The detailed wings and dress cut cleanly on most diode lasers.
For double-sided use, simply mirror the design, cut it twice, and glue the pieces back-to-back. This makes the ornament look perfect from both sides – ideal for doors, windows, and open spaces.

Assembly Notes

No assembly required for single-sided version.

For double-sided effect:

Mirror the design in software.

Cut two pieces: one normal, one mirrored.

Align the edges and glue together, press with clamps.

Result: perfect double-sided ornament with clean edges.

Comments