Report
![[Laser cut and engrave] Laser Cut Wooden Christmas Tree Ornament with Pinecone Design](https://storage-us.atomm.com/resource/xtool/community/attachment/xtool-community/8c4339b8-3833-4eb5-83b8-8320ce8f1205.jpeg?x-oss-process=image/resize,w_1200,h_900,limit_0/interlace,1/format,webp/auto-orient,1)
![[Laser cut and engrave] Laser Cut Wooden Christmas Tree Ornament with Pinecone Design](https://storage-us.atomm.com/resource/xtool/community/attachment/xtool-community/8c4339b8-3833-4eb5-83b8-8320ce8f1205.jpeg?x-oss-process=image/resize,w_200,h_150,limit_0/interlace,1/format,webp/auto-orient,1)
![[Laser cut and engrave] Laser Cut Wooden Christmas Tree Ornament with Pinecone Design](https://storage-us.atomm.com/resource/xtool/community/attachment/xtool-community/0caaf7ad-3e7f-43ae-9fac-39b68d5c3a4e.jpeg?x-oss-process=image/resize,w_200,h_150,limit_0/interlace,1/format,webp/auto-orient,1)
O Christmas Tree Ornament with Pinecone
2025 Christmas Contest
Instruction
Christmas Tree Ornament
.xcs
Application scenario
Laser processing (60min)
Machine & module
xTool P2
55WCompatibles · 12
Material used
1/8"(3mm) Basswood Plywood
16
Information
2-layered laser-cut wooden Christmas Tree Ornament with a pinecone. The whimsical, scalloped edge outline and lyrics are engraved. The pinecone is engraved, cut out, stained, and finally glued on top.
Instruction
1
Step1
Preview
Engrave and cut out both pieces of the design. The engraving settings may look better on your material if you do two passes. All machines and materials vary.
2
Step2
Clean plywood with rubbing alcohol and a microfiber towel. When dry, stain the Pinecone with the stain of your choice. I used the Varathane Less Mess Golden Oak Wood Stain and Applicator bottle. Follow the instructions on the stain. Then glue two layers together with super glue.
Comments
