cwo.hobart

Report

[Laser cut and engrave] Laser Cut Wooden Coffee Alarm Emergency Box with Glass Front — Project made with xTool S1 machine for Laser cut and engrave.

"Instant Coffee Storage" Laser Cut Emergency Coffee Box with Engraved Acrylic Front

Instruction

Emergency Coffee

.xcs

Application scenario

Laser processing

Machine & module

xTool S1

40W

Compatible xTool Machine

10W, 20W

F2 Ultra UV

15W

80W

F2 Ultra

40W

F1 Ultra

20W

5W, 10W

5W, 10W, 20W

D1 Pro

5W, 10W, 20W, 40W

55W

10W

10W, 20W

M1 Ultra

10W, 20W

P2S

55W

Material used

1/8"(3mm) Basswood Plywood

1/8"(3mm) Green Translucent Acrylic

1/4"(6mm) Birch Plywood

971

Information

      This is storage for that instant coffee we never use "Emergency Only" and it works by getting it off the counter.  Besides storage it is a great conversation piece. The box is 1/8" Bass Plywood and the glass is 1/8" Green Translucent Acrylic (My First Published Acrylic Project with colored acrylic).

coffeeorganizercontest

Instruction

Step1: Gather, Cut and Engrave Materials for the Box

Preview

You will need 1 sheet of 12" x 12" Bass Plywood for the box
The layout is shown and setup in the above screen shot for you
The setting are also shown in the above screen shot

Step2: Gather, Cut and Engrave the Acrylic

Preview

This was my first Published Project using acrylic, so the setting could be better
It took 3 passes to cut the Green Translucent Acrylic, setting are shown in the screen shot above
NOTE: I used the cutting setting shown above to get a the engraved look, it worked better for me. This may not be the correct way, but worked for me.