![[Laser cut and engrave] Laser Engraved Wooden Coffee Quote Wall Sign with Leather Strap](https://storage-us.atomm.com/resource/xtool/community/attachment/xtool-community/0f319d2f-b1f6-44d8-8c4a-e1bb52170d73.png?x-oss-process=image/resize,w_1200,h_900,limit_0/interlace,1/format,webp/auto-orient,1)
![[Laser cut and engrave] Laser Engraved Wooden Coffee Quote Wall Sign with Leather Strap](https://storage-us.atomm.com/resource/xtool/community/attachment/xtool-community/0f319d2f-b1f6-44d8-8c4a-e1bb52170d73.png?x-oss-process=image/resize,w_200,h_150,limit_0/interlace,1/format,webp/auto-orient,1)
![[Laser cut and engrave] Laser Engraved Wooden Coffee Quote Wall Sign with Leather Strap](https://storage-us.atomm.com/resource/xtool/community/attachment/xtool-community/2f884c8e-1c0c-4df0-8ea7-a74cbaced2da.png?x-oss-process=image/resize,w_200,h_150,limit_0/interlace,1/format,webp/auto-orient,1)
![[Laser cut and engrave] Laser Engraved Wooden Coffee Quote Wall Sign with Leather Strap](https://storage-us.atomm.com/resource/xtool/community/attachment/xtool-community/54935113-ffbe-40f2-bc09-a0dcd454b9ee.png?x-oss-process=image/resize,w_200,h_150,limit_0/interlace,1/format,webp/auto-orient,1)
![[Laser cut and engrave] Laser Engraved Wooden Coffee Quote Wall Sign with Leather Strap](https://storage-us.atomm.com/resource/xtool/community/attachment/xtool-community/39762865-71e9-4a90-a04c-d26ced69a7e1.png?x-oss-process=image/resize,w_200,h_150,limit_0/interlace,1/format,webp/auto-orient,1)


A substantial wall-hanging plaque that looks like it’s been part of the kitchen for decades.
It’s Engraved in a thick slab of live edge acacia wood. The text is deeply laser-engraved into the wood. The laser settings are high enough to create significant depth and a dark, rich char inside the letters, providing high contrast without needing paint.
The surface wood is sanded smooth and oiled to bring out the grain, while the engraved areas remain dark and textured.
It hangs from the wall using a thick, rustic leather strap attached to the wood with aged brass fasteners.

Resize the Text as per your Material. I used a 16x8 live edge slab for this.

Change the Power and Speed as needed. I did two pass for deep engraving
After engraving, sand it with 120 grit sand paper and apply finish of your choice. I use beeswax.
If you want to hang it, use a rope or leather strap, as I did. You can also place it on a table, or use it as a tray.