Report

[Laser cut and engrave] Portachiavi a forma di luminarie salentine con cactus e rosone — Project made with xTool F2 machine for Gift.

Keychain Luminarie Salentine -"susu la serra"

Instruction

Luminarie-Salentine-1_Makerello

.dxf

Application scenario

Laser processing

Machine & module

xTool F2

15W

Material used

Poplar wood 3mm

Poplar wood 5mm

509

Information

      First launch of the Luminarie Salentine collection - "susu la serra" (Above the greenhouse)
This project was born from the link with my origins and the desire to transform into an object something that, for me, represents tradition, celebration and a sense of community. Illuminations are much more than just decorations: they are a symbol of culture, craftsmanship and shared moments that accompany entire generations.
I wanted to reinterpret their characteristic shapes in a design that would preserve their identity and charm, trying to enclose in a few details that warm and welcoming atmosphere that makes them so special.

💙 If you like this project, leave me a comment and a like, it is the best way to support the realization of new ideas and future collections inspired by the territory and its traditions. 🚀

Salento illuminations

Apulia

Pendant

Party

Instruction

Step1: Cutting

Preview

Laser cutting with machine-predefined settings for the chosen wood thickness.

Step2: Sanding

Sanding the workpiece with fine-grit sandpaper.

Step3: Painting

Preview

According to personal preference, paint the piece white with spray or water-based paint.

According to tradition, the Salento Luminaries have a white structure.

Step4: Decoration

Preview

Last but most important step for our lights: decoration!
To make it a real light, through the use of paints (acrylics, markers, or etc.) the "light bulbs" must be painted. In the photo you can see the result of a varnish obtained with very simple UV enamels, with an additional layer of transparent UV enamel as a top coat always only on the fairy lights.

Comments