Report

[Laser cut and engrave] Portachiavi Luminarie Salentine -"nd'oru de festa" — Project made with xTool F2 machine for Laser cut and engrave.

Luminarie Salentine keyring -"nd'oru de festa"

Instruction

Luminarie-Salentine-2_Makerello

.dxf

Application scenario

Laser processing

Machine & module

xTool F2

15W

Material used

Poplar wood 3mm

Poplar wood 5mm

516

Information

      Second launch of the Luminarie Salentine collection - "nd'oru de festa" (Smell of celebration)
This project was born from the link with my origins and the desire to transform into an object something that, for me, represents tradition, celebration and a sense of community. Illuminations are much more than just decorations: they are a symbol of culture, craftsmanship and shared moments that accompany entire generations.
I wanted to reinterpret their characteristic shapes in a design that would preserve their identity and charm, trying to enclose in a few details that warm and welcoming atmosphere that makes them so special.

💙 If you like this project, leave me a comment and a like, it is the best way to support the realization of new ideas and future collections inspired by the territory and its traditions. 🚀

Salento illuminations

Pendant

Instruction

Step1: Cutting

Preview

Laser cutting with machine presets for the chosen wood thickness.

Step2: Sanding

Sanding the workpiece with fine-grit sandpaper.

Step3: Painting

Preview

According to personal preference, paint the piece white with spray or water-based paint.

According to tradition, the Salento Luminaries have a white structure.

Step4: Decoration

Preview

Last but most important step for our illuminations: decoration!
To make it a real luminary, through the use of paints (acrylics, markers, or etc.) the "bulbs" must be painted. In the photo you can see the result of a varnish obtained with very simple UV enamels, with an additional layer of transparent UV enamel as a top coat always only on the fairy lights.

Comments