Description
What is this?
Spirograph Maker is a tool used to create spirograph sets. By rolling small gears along the inner circle of a large gear, you can draw layered patterns.
- Craft: Laser Cutting + Vector Engraving
- Material: 3mm Plywood or Acrylic
- Modulus fixed at 1.5mm, full tooth height 3.4mm; cut seam compensation handled by the generator - SVG: 1:1 actual size
Interface Introduction
On the left side is a set of presets, and on the right side you can select the small gears you need to export.
 |  |
Output
- SVG/DXF: Cutting geometry;
- PDF: Manual (Parts List + Usage + Pattern Reference), A4;
- JSON: Project file, which can be imported into the generator for further modification;
Comments