Laser Engraved Wooden Circular Earrings with Coffee Design - 2 types

As you can see on the pictures, I added 2 different engraving designs. Choose whichever you like, or make them both.

All things set for a 10W M1 machine with riser base, honeycomb panel and air assist. I use 3mm pine plywood sheet.

Use fine-grip sanding paper to sand both sides and the edges. It worth to make it to have clear lines. Use a damp cloth after that to eliminate all dust.

Add a light layer of coating (I use ‘La Pajarita’ matte varnish). Wait until it dries.

Assemble your earrings. You'll need big circles to attach to the wood, then you can use small ones, and earring hoops.