![[Laser cut and engrave] Laser Cut Wooden Coffee Cup Earrings with Steam Design](https://storage-us.atomm.com/resource/xtool/community/attachment/xtool-community/d319336a-6caf-44be-9a70-274cfea489e7.JPG?x-oss-process=image/resize,w_1200,h_900,limit_0/interlace,1/format,webp/auto-orient,1)
Laser Cut Wooden Coffee Cup Earrings with Steam Design
Lucky Prize in Coffee Décor Contest 
Instruction
Information
Easy to make engraved earrings
Instruction
Step1: Cut & Engrave
Use my settings to engrave and cut these earrings; you can resize if you want but pay attention to the little holes to be able to assemble.
My settings are working for 3mm pine plywood; I am working with a 10W M1 machine with riser base, honeycomb panel and air assist.
Step2: Sanding
Since I am not painting these pieces, I decided to sand them everywhere (top, bottom, and sides as well). I use fine sanding paper, and running thru on all pieces with it.
After I finished, I am using baby wipes to wipe it down.
Step3: Secure
You can use wax, paint, varnish, nail polish, or UV resin to harden your pieces a bit and make them waterproof.
I am using matte varnish for this task, any apply it in one layer to everywhere.
Step4: Assemble your earrings
Once the varnish is dried completely, you can attach the pieces together with a bigger jewely ring, and add the arring hooks as well. You are ready to wear them :)
