Robs Creation Lab

Report

[Laser cut and engrave] Fiber Laser - Medium 3D Print Testing card for testing engraving — Project made with xTool F1 Ultra machine for Laser cut and engrave.

[Laser cut and engrave] Fiber Laser - Medium 3D Print Testing card for testing engraving — Project made with xTool F1 Ultra machine for Laser cut and engrave.

[Laser cut and engrave] Fiber Laser - Medium 3D Print Testing card for testing engraving — Project made with xTool F1 Ultra machine for Laser cut and engrave.

[Laser cut and engrave] Fiber Laser - Medium 3D Print Testing card for testing engraving — Project made with xTool F1 Ultra machine for Laser cut and engrave.

[Laser cut and engrave] Fiber Laser - Medium 3D Print Testing card for testing engraving

[Laser cut and engrave] Fiber Laser - Medium 3D Print Testing card for testing engraving

[Laser cut and engrave] Fiber Laser - Medium 3D Print Testing card for testing engraving

[Laser cut and engrave] Fiber Laser - Medium 3D Print Testing card for testing engraving

Fiber Laser - Medium 3D Print Testing card for testing engraving

Instruction

MediumFilamentTester90mmx100mm.xcs

MediumFilamentTester90mmx100mm

.xcs

Application scenario

Laser processing

Machine & module

xTool F1 Ultra

20W

Material used

PETG

ABS

PA

PLAN

ASA

TPU

TPE

Any Thing

gift

48

1779

Information

      Medium Fiber laser testing from 10 - 100% power and 250 - 7500 mm/s on 3D Printed Material. The testing area is 100mm x 140mm, so you need that much space or larger. 

The 90mm x 100mm 3D printer file here 
https://makerworld.com/en/models/1368367-90mm-x-100mm-material-test-card#profileId-1414469

Instruction

1

Step1

Start by acquiring the material you wish to test, or download the tester.

File link for 90mm x 100mm

https://makerworld.com/en/models/1368367-90mm-x-100mm-material-test-card#profileId-1414469

2

Step2

3d Print the model you downloaded. Once have your material ready, 3d printed or otherwise, proceed to the next step

3

Step3

Load the XCS and place your test material on the work area

4

Step4

With framing, or your method, line up the test material

5

Step5

BEFORE YOU PROCEED, update the material type in the Red text.

6

Step6

Close the cover, and run the file

7

Step7

*Caution: Material May Be Hot* Once complete, remove the test material and inspect it. If done, great job and enjoy.

If you are continuing testing, proceed back to step 3, then wash, rinse, and repeat until you have done all your testing.

8

Step8

Clean up your work area and enjoy your hard work

Comments

Remixes

License

You may also like

material test card

material test template