Report

[Laser cut and engrave] Black PLA Laser Engrave Test Grid with Speed and Power Settings / schwarzes PLA Test Grid mit Geschwindigkeits- und Leistungseinstellungen — Project made with F2 machine for Laser cut and engrave.

Black PLA Laser Engrave Test Grid with Speed and Power Settings / schwarzes PLA Test Grid mit Geschwindigkeits- und Leistungseinstellungen

Atomm Exclusive

Instruction

BLACK PLA Test Grid

.xcs

Application scenario

Laser processing (0.5min)

Machine & module

xTool F2

5W, 15W

Compatible xTool Machine

F2 Ultra UV

F2 Ultra（Single）

F2 Ultra

F1 Ultra

F1 Lite

P2S

M1 Ultra

D1 Pro 2.0

D1 Pro

Laserbox

Material used

PLA black

123

2345

Information

      The test grid is laser-engraved onto 3D-printed PLA to investigate the material behavior of PLA under defined laser parameters. The aim is to systematically analyze the effects of power, speed, focus, and line spacing on engraving depth, contrast, edge quality, and surface alteration.

The standardized grid allows for reproducible comparison of results and the derivation of optimal laser parameters for engraving PLA. Furthermore, the test grid serves to evaluate dimensional accuracy, thermal stress, and potential material deformation, thus assessing the suitability of PLA for precise laser engraving in functional and visual applications.

Instruction

Step1: create and engrave

Black PLA Laser Engrave Test Grid with Speed and Power Settings / schwarzes PLA Test Grid mit Geschwindigkeits- und Leistungseinstellungen instruction: step 1 - create and engrave

Preview

visit: https://www.instagram.com/beamcrafting/

Create a test grid in xTool Studio via the application menu. Enter the IR laser module and the power and speed ranges. Then, select the size of your test grid by specifying the number of rows and columns.

Once it's created, ungroup the grid and set the labeling parameters.

Now, align the grid with your material and start the test.

As always, observe the appropriate safety precautions.

Comments