Laser Cut Nativity Scene Stained Glass Ornament

You need 2 sheets of 160g black cardboard and sheets of stained glass paper in yellow, red, pink, green, orange, brown, purple and blue colors.

The cuts were made with an S1 20W, remember to change the cutting parameters according to your machine<

span lang="EN">You will need 2 sheets of 160g black cardstock and sheets of stained glass paper in yellow, red, pink, green, orange, brown, purple and blue.

The cuts were made with an S1 20W, remember to modify the cutting parameters according to your machine.

Cut the design twice (1 for the front and 1 for the back of the stained glass) in the sheets of black cardboard

Cut the design twice (1 for the front and 1 for the back of the stained glass window) from the black cardboard sheets.

cut out shapes from stained glass paper

cut out the shapes from the stained glass paper

On the back of the black cardboard cutout (the word NOEL upside down) glue the outline of the shapes with a fine brush and then carefully glue the stained glass paper cut out.

On the reverse side of the black cardboard cutout (the word NOEL backwards) glue the outline of the shapes with a fine brush then carefully glue the cut-out stained glass paper

glue the second black cardboard cutout to the back of the stained glass window<o:p>

glue the second black cardboard cutout to the back of the stained glass window