![[Laser cut and engrave] Laser Cut Wooden Nativity Scene Christmas Ornament Decoration](https://storage-us.atomm.com/resource/xtool/community/attachment/xtool-community/c1cb6a15-0ea0-4a38-b351-cc2d4c92af58.png?x-oss-process=image/resize,w_1200,h_900,limit_0/interlace,1/format,webp/auto-orient,1)
![[Laser cut and engrave] Laser Cut Wooden Nativity Scene Christmas Ornament Decoration](data:image/gif;base64,R0lGODlhAQABAAAAACH5BAEKAAEALAAAAAABAAEAAAICTAEAOw==)
Laser Cut Wooden Nativity Scene Christmas Ornament Decoration
2025 Christmas Contest
Instruction
Information
A beautifully detailed round nativity scene with engraved holy figures and a layered 3D interior. Designed for 3mm plywood, easy to assemble, and perfect as a Christmas decoration. This Christmas Nativity Scene features a circular frame, vented lattice side walls, and engraved standing figures of Joseph, Mary, and baby Jesus. The design creates a charming 3D effect thanks to its layered construction and open front.
Perfect for shelves, tables, or Christmas displays.
The project includes all parts required for the full scene, designed for 3mm wood and clean laser cutting.
Assembly is simple and requires only wood glue.
Instruction
Step1
This Christmas Nativity Scene features a circular frame, vented lattice side walls, and engraved standing figures of Joseph, Mary, and baby Jesus. The design creates a charming 3D effect thanks to its layered construction and open front.
Perfect for shelves, tables, or Christmas displays.
The project includes all parts required for the full scene, designed for 3mm wood and clean laser cutting.
Assembly is simple and requires only wood glue.
Assembly Guide
Cut all parts using the laser settings provided below.
Glue the two circular frame pieces together.
Attach the perforated side walls inside the frame to form the round enclosure.
Insert and glue the floor platform.
Engrave and cut the holy figures (Joseph, Mary, Baby Jesus).
Insert the figures into their slots on the platform so they stand upright.
Apply a small amount of wood glue to secure all components.
Allow the entire structure to dry for 20–30 minutes before moving.
Laser Settings (xTool S1 – 20W reference)
Cut
Power: 95%
Speed: 6 mm/s
Passes: 1
Air Assist: ON
Engrave
Power: 80%
Speed: 200 mm/s
Passes: 1
Tips
Mask the plywood for cleaner engraving and minimal burn marks.
Optional: Create a second engraved figure set for a deeper 3D effect.
You can finish the surface with oil or wax to enhance contrast and durability.
