Report
![[Laser cut and engrave] Laser Cut Wooden Nativity Scene Christmas Decoration](https://storage-us.atomm.com/resource/xtool/community/attachment/xtool-community/eba929e0-8e61-4c5e-b5eb-c8d6451b3f0a.jpg?x-oss-process=image/resize,w_1200,h_900,limit_0/interlace,1/format,webp/auto-orient,1)
![[Laser cut and engrave] Laser Cut Wooden Nativity Scene Christmas Decoration](data:image/gif;base64,R0lGODlhAQABAAAAACH5BAEKAAEALAAAAAABAAEAAAICTAEAOw==)
Nativity Scene Christmas Decoration
2025 Christmas Contest
InstructionNativity stand - Briz Design
.xcs
Application scenario
Laser processing
Machine & module
xTool P2S
55W
xTool M1
5W, 10W
xTool S1
10W, 20W, 40WCompatibles · 9
Material used
1/8"(3mm) Basswood Plywood
Glue
4
32
Information
Laser Cut Wooden Nativity Scene Christmas Decoration
Made out of plywood, cut and engraved on the P2S
Can also be made on the D, M and S lasers.
If you want to make it smaller adjust the slot from the stand!
Instruction
1
Step1: Material and settings
Preview
Load the file in Xtool Studio.
The settings in the file are for the P2S.
Choose (upper right corner) the machine you are using.
Choose the material you are using.
Choose the right settings for you material.
Focus, measure and frame and then start the job.
2
Step2: Assembly
Preview
Preview
Preview
After engraving and cutting you've got 3 parts.
Glue the small slotted part on the larger oval.
You can choose the glue position, I chose to glue it in the middle.
3
Step3: Complete the stand
Preview
Preview
Once the glue has dried you can put the engraved part in the slot.
Use glue for sturdiness.
For a more robust look I stained the parts with dark bees wax.
4
Step4: Completed
Preview
Preview
Here you see the completed stand, before and after I applied the bees wax.
Comments
