Report
![[Laser cut and engrave] Jack-o-lantern tealight stand](https://image-res.atomm.com/resource/xart/result/389041/f2e87146-fe5f-43a6-a971-1bb15613b87b.png?x-oss-process=image/resize,w_1200,h_900,limit_0/interlace,1/format,webp/auto-orient,1)
![[Laser cut and engrave] Jack-o-lantern tealight stand](data:image/png;base64,iVBORw0KGgoAAAANSUhEUgAAAAoAAAAKCAYAAACNMs+9AAAAAXNSR0IArs4c6QAAABdJREFUKFNjZCASMBKpjmFUId6QIjp4AAppAAuXjCs4AAAAAElFTkSuQmCC)
![[Laser cut and engrave] Jack-o-lantern tealight stand](https://image-res.atomm.com/resource/xart/result/389041/f2e87146-fe5f-43a6-a971-1bb15613b87b.png?x-oss-process=image/resize,w_200,h_150,limit_0/interlace,1/format,webp/auto-orient,1)
![[Laser cut and engrave] Jack-o-lantern tealight stand](https://image-res.atomm.com/resource/xtool/community/attachment/xtool-community/efb9727d-8ed7-43b0-bd89-7d0b20284370.jpg?x-oss-process=image/resize,w_200,h_150,limit_0/interlace,1/format,webp/auto-orient,1)
![[Laser cut and engrave] Jack-o-lantern tealight stand](https://image-res.atomm.com/resource/xtool/community/attachment/xtool-community/9f0ec2ce-7ddd-4224-99ae-f73aba7d8cb9.jpg?x-oss-process=image/resize,w_200,h_150,limit_0/interlace,1/format,webp/auto-orient,1)
Jack-o-lantern tealight stand
Instruction
halloween_tealight_holder
.xcs
Application scenario
Laser processing
Machine & module
xTool M1 Ultra
20WCompatible xTool Machine
New
M2
10W, 20WF2 Ultra UV
5WF2
15WP3
80WF2 Ultra
40WF1 Ultra
20WM1
5W, 10WD1
5W, 10W, 20WD1 Pro
5W, 10W, 20W, 40WP2
55WF1
10WS1
10W, 20W, 40WM1 Ultra
10WP2S
55WMaterial used
1/8"(3mm) Basswood Plywood
117
1836
Information
A Jack-o-lantern tealight stand. It is easy to make and a perfect project for Halloween.
It will also project the image on a wall as seen in the first image.
If using an open flame such as a tea light, do not leave unattended.
Instruction
1
Step1
Preview
Cut out all of the pieces. Make sure you don't throw away the small T shaped pieces.
2
Step2
Preview
Glue the T shaped pieces in to the bottom part. Make sure they are all aligned.
3
Step3
Preview
Glue the head model to the previously assembled part.
Make sure it is perpendicular to the bottom part. If using wood glue, brace it with something to hold it in place.
Using a few drops of superglue is very helpful to keep everything in place.
4
Step4: Paint
As an optional last step, paint the model.
Comments
Remixes
You may also like
Grusel Teelichter / Halloween / Herbst
47
215
Ghost Candle Holder SVG, Halloween Shadow Tealight Decor, Spooky Laser Cut Files DXF, Haunted Ghost Tea Light Holder Pattern
10
45
Halloween Pumpkin and Tree Wooden Candle Holder Lantern
7
46
'/%3e%3cdefs%3e%3clinearGradient%20id='paint0_linear_1433_15675'%20x1='12'%20y1='3.25'%20x2='16.6891'%20y2='20.75'%20gradientUnits='userSpaceOnUse'%3e%3cstop%20stop-color='%23FF5D80'/%3e%3cstop%20offset='1'%20stop-color='%23FF0035'/%3e%3c/linearGradient%3e%3c/defs%3e%3c/svg%3e)
Halloween Tombstone Candle Holder SVG | Creepy Grave Lantern Laser Cut Files
23
73
3D Autumn lantern laser cut. Wooden candle holder. Fall tealight lantern SVG. Rustic lamp. Tea candle holder svg. Farmhouse svg. 1 Design
103
653
Snowflake Tealight Holder with Removeable Top
48
209
Wooden LED Candle Holder – Ghost & Bats Shadow
4
30
Holder for an 'electric tealight'
5
21
$6.00
$6.00
Credits600
Spooky tealight candle holder set of 4 svg
0
Snowflake tealight stand
36
132
Battery Tealight Candle Holder
41
126
Laser Cut Wooden Candle Holder Lantern Tealight
146
1030
Pumpkin lantern
0
4
Tealight holder for Mothersday
24
88
Laser Cut Haunted House Candle Holder with Shadow Projection
13
48
Halloween Candle Holder
28
180
Wooden LED Candle Holder – Pumpkin with Angry Face
1
6
'/%3e%3cdefs%3e%3clinearGradient%20id='paint0_linear_1433_15726'%20x1='12'%20y1='5.25'%20x2='12'%20y2='18.75'%20gradientUnits='userSpaceOnUse'%3e%3cstop%20stop-color='%23FFC654'/%3e%3cstop%20offset='1'%20stop-color='%23FF8D12'/%3e%3c/linearGradient%3e%3c/defs%3e%3c/svg%3e)
Christmas Tree Tealight Holder
8
35