tpleo54

Report

[Laser cut and engrave] wood caliper — Project made with xTool S1 machine for Laser cut and engrave.

[Laser cut and engrave] wood caliper — Project made with xTool S1 machine for Laser cut and engrave.

[Laser cut and engrave] wood caliper

[Laser cut and engrave] wood caliper

wood caliper

Instruction

Caliper_V3_Full.xcs

Caliper_V3_Full

.xcs

Application scenario

Laser

Machine & module

xTool S1

40W

Compatible xTool Machine

New

M2

10W, 20W

F2 Ultra UV

5W

F2

15W

P3

80W

F2 Ultra

40W

F1 Ultra

20W

M1

5W, 10W

D1

5W, 10W, 20W

D1 Pro

5W, 10W, 20W, 40W

P2

55W

F1

10W

S1

10W, 20W

M1 Ultra

10W, 20W

P2S

55W

Material used

1/8"(3mm) Basswood Plywood

3mm Basswood Plywood

gift

521

4588

Information

Instruction

1

Step1: lay out your design

wood caliper instruction: step 1 - lay out your design

Preview

lay out your design and set your power and speed. The red arrow in the drawing indicates the line where the measurements are read.

2

Step2: Score and cut

score and cut using the settings for your machine

3

Step3: assemble

wood caliper instruction: step 3 - assemble

Preview

Dry fit the parts before gluing. The holes are for bolting together if you prefer to do that instead of using glue.

4

Step4: Sand if needed

wood caliper instruction: step 4 - Sand if needed

Preview

wood caliper instruction: step 4 - Sand if needed

Preview

Before gluing the parts together make sure it slides easily. If it doesn't then sand lightly.

Comments

Remixes

License

You may also like

vernier caliper