Report

[Laser cut and engrave] Laser engraving machine with wooden board setup — Project made with S1 machine for Laser cut and engrave.

F1 Ultra Base Plate Jig

Instruction

S1-F1UBaseplatebaseplate

.xcs

Application scenario

Laser processing (1min)

Machine & module

xTool S1

40W

Compatible xTool Machine

F2 Ultra UV

F2 Ultra（Single）

F2 Ultra

F1 Ultra

F1 Lite

P2S

M1 Ultra

D1 Pro 2.0

D1 Pro

Laserbox

Material used

1/8"(3mm) Basswood Plywood

184

4167

Information

      This is the bottom/base to be used in creating jigs for the F1 Ultra platform. Cut on a S1 40 Watt, this could be adapted to other lasers. Warning on doing this with the galvo lasers, you will get beveling due to the fixed position of the galvos.

Laser Engraving

Instruction

Step1

Preview

This is designed to make creating jigs for the F1 Ultra easier for beginners.

I cut this on a S1 40 watt, but you could use any gantry laser for this.

The file will cut out the necessary holes that line up with the baseplate of my F1 Ultra. Easy to pick up fasteners to fit from your local hardware store.

Please delete holes that may get in your way when making your jig.

This is modifiable to cover a larger portion of the F1 Ultra plate, just use the spacing that is included in this copy.

Happy making!

Comments