Report
![[Laser cut and engrave] Dessin à colorier mandala papillon avec fleurs sur table en bois](https://storage-us.atomm.com/resource/xtool/community/attachment/xtool-community/526ed5e7-9ece-4265-95f6-70325f6b426f.png?x-oss-process=image/resize,w_1200,h_900,limit_0/interlace,1/format,webp/auto-orient,1)
Bee Mandala
Instruction
Untitled
.xcs
Application scenario
Laser processing (120min)
Machine & module
xTool S1
20WMaterial used
motip paint Matt Black
Glass
1
40
Information
Mandala design for glass engraving in negative or positive with paint as a cover
Instruction
1
Step1: Clean clear glass with methanol
2
Step2: sprayed 2 thin coats of matte black MOTIP paint (for bodywork) at 20 min intervals
3
Step3: place the pattern either in negative or positive, depending on your choice, the paint serves as a cover to paint or gild the graphic on the reverse side
4
Step4: Place the glass on brackets at the 4 corners so that the glass does not touch the grid
5
Step5: focus, frame and run the burner 1x with 40/200/200 and then 1x 50/200/200 to clean
6
Step6: All you have to do is rinse the glass with a brush and slightly soapy water
7
Step7: You can paint directly on glass with acrylic or stained glass paint
Very simple to implement, MOTIP paint is very fine and opaque in 2 veils, dries very glass, your work is very clean.
8
Step8: end
5th tips for engraving painting on glass in order to have a clean background to add opaque or stained glass colors.
Comments
