Laser Engraved Wooden Coffee Brewing Instruction Sign for V60

Steps:

1. Load the provided design file into xTool Creative Space.
2. Attache the slide extension.
3. Place a plywood sheet on the machine bed and secure it properly.
4. Use the included pre-set parameters to engrave the V60 recipe on the plaque.
5. After engraving is complete, proceed with laser cutting the plaque and the stand.
6. Remove the finished parts from the bed.
7. Lightly sand the edges if needed.
8. Assemble the plaque with the stand.

Notes:

• This project includes both engraving and cutting.
• The design file contains optimized settings for plywood.
• A test run is recommended if using a different plywood type or thickness.