“HONEY" RING

Import the file into XCS software. Remove the machine baseplate, put the raised pillars at the bottom of the machine. Place the ring on the rotary attachment and put it in the center of the machine and start focusing. Ensure that the engraved pattern is in the center of the ring through the framing and cross cursor.

Take out the engraved ring of the machine.

Notes

1.The pattern should be placed in the center of the ring engraving area before engraving, whichever is based on the leftmost of the pattern.

2.The ring will be hot after engraving, you can take it out with wet paper towels.