Report
![[Laser cut and engrave] Optical Illusion Demonstration: Which table is wider?](https://image-res.atomm.com/resource/xtool/community/attachment/xtool-community/a4a09d6d-4479-4118-9315-9890c792fca8?x-oss-process=image/resize,m_fill,w_1280,h_960,limit_0/interlace,1/format,webp/auto-orient,1)
![[Laser cut and engrave] Optical Illusion Demonstration: Which table is wider?](data:image/png;base64,iVBORw0KGgoAAAANSUhEUgAAAAoAAAAKCAYAAACNMs+9AAAAAXNSR0IArs4c6QAAABdJREFUKFNjZCASMBKpjmFUId6QIjp4AAppAAuXjCs4AAAAAElFTkSuQmCC)
![[Laser cut and engrave] Optical Illusion Demonstration: Which table is wider?](https://image-res.atomm.com/resource/xtool/community/attachment/xtool-community/a4a09d6d-4479-4118-9315-9890c792fca8?x-oss-process=image/resize,m_fill,w_160,h_120,limit_0/interlace,1/format,webp/auto-orient,1)
![[Laser cut and engrave] Optical Illusion Demonstration: Which table is wider?](https://image-res.atomm.com/resource/xtool/community/attachment/xtool-community/9819390c-8668-4f6a-851c-6ac1fa63940c.jpg?x-oss-process=image/resize,m_fill,w_160,h_120,limit_0/interlace,1/format,webp/auto-orient,1)
![[Laser cut and engrave] Optical Illusion Demonstration: Which table is wider?](https://image-res.atomm.com/resource/xtool/community/attachment/xtool-community/719891c5-3445-42a1-922f-1b8918c4b508.jpg?x-oss-process=image/resize,m_fill,w_160,h_120,limit_0/interlace,1/format,webp/auto-orient,1)
![[Laser cut and engrave] Optical Illusion Demonstration: Which table is wider?](https://image-res.atomm.com/resource/xtool/community/attachment/xtool-community/b2ffe15f-62a1-4996-8bd1-0a2540671cb0.jpg?x-oss-process=image/resize,m_fill,w_160,h_120,limit_0/interlace,1/format,webp/auto-orient,1)
![[Laser cut and engrave] Optical Illusion Demonstration: Which table is wider?](https://image-res.atomm.com/resource/xtool/community/attachment/xtool-community/7f5e84aa-04e9-4e45-9060-4f6ef8f1a3ab.jpg?x-oss-process=image/resize,m_fill,w_160,h_120,limit_0/interlace,1/format,webp/auto-orient,1)
Optical Illusion Demonstration: Which table is wider?
Instruction
Whichiswider
.xcs
Application scenario
Laser processing
Machine & module
xTool S1
40WCompatible xTool Machine
P3
F2
F2 Ultra UV
F2 Ultra（Single）
F2 Ultra
F1 Ultra
F1
F1 Lite
P2S
P2
M1 Ultra
M1
D1 Pro 2.0
D1 Pro
D1
Laserbox
M2
Material used
1/8"(3mm) MDF Board
10
1131
Information
This is made from 2 pieces. I used 1/8 MDF. the table tops look different sizes but are not. the tops can be exchanged to show that they are the exact same.
Instruction
1
Step1: Set up
This illusion can be easily made from MDF or plywood. You need a piece about 12"x6" total. Red layer is for cuts, Green for score lines and yellow for engraving.
Place material in the bed.
Measure the height and locate the material.
2
Step2: Engrave and cut
Process and send job to the laser.
3
Step3: Clean up and glue.
Wipe edges to remove any soot. Lightly sand to remove scorch marks from surface. Be careful to not remove engraving.
Glue the to layers together flip the bottom layer so the holes line up under the tabletops.
DO NOT GLUE IN THE TOPS.
Apply a coating if desired.
Comments
Remixes
You may also like
Wooden 5 piece Puzzle with tray
7
72
Mini Stool
27
117
$1.99
$1.99
Credits199
Palet
5
Impossible Triangle 3D
14
74
Eight L Challenge Puzzle
5
58
Miniature wooden park bench for dollhouse or craft projects
10
34
Display Stand
30
224
Triangle Squeeze-Them-In Puzzle
5
26
Puzzle, Knobelei, Spielzeug
41
393
3-in-1 Squeeze-Them-In Puzzle
14
129
Miniature wooden coffee table with decorative engravings
10
44
$4.79
$4.79
$9.58
Credits479
Picture frame 4x6, design laser cut, 2 pattern cutting. Cut model, gift for her, birthday gift. For handmade decor, photo holder, stand holder.
12
Kids Toy Highway Sign
13
29
Picnic Table
102
413
jig engraved line
1
4
4-In-1 Squeeze-Them-In Puzzle
4
17
Miniature wooden pergola model for DIY projects
20
102
$1.79
$1.79
$1.99
Credits179
A small wooden table for candles and planters
10