Report
![[Laser cut and engrave] Mini Stool](https://image-res.xtool.com/resource/xtool/community/attachment/xtool-community/208ec861-3312-4d16-9028-e93a10139c07?x-oss-process=image/resize,w_1200,h_900,limit_0/interlace,1/format,webp/auto-orient,1)
![[Laser cut and engrave] Mini Stool](data:image/gif;base64,R0lGODlhAQABAAAAACH5BAEKAAEALAAAAAABAAEAAAICTAEAOw==)
Mini Stool
InstructionMini Stool
.xcs
Show 1 more
Application scenario
Laser processing (10min)
Machine & module
xTool S1
40WCompatibles · 12
Material used
1/8"(3mm) Basswood Plywood
3mm Basswood Plywood
72
675
Instruction
1
Step1
Tuned up the machine and the focus, etc. and started cutting. I used about 3mm boards, so it's okay to be a little off. I forgot to take step-by-step pictures, but this thing is very, very simple to put together and glue in place.
Comments
