Report
![[Laser cut and engrave] Wooden 7 Piece Tangram Puzzle With Tray](https://image-res.xtool.com/resource/xtool/community/attachment/xtool-community/9b8ccdd1-a19f-4a59-bd36-811b8e3fbaa6?x-oss-process=image/resize,w_1200,h_900,limit_0/interlace,1/format,webp/auto-orient,1)
Wooden 7 Piece Tangram Puzzle With Tray
Instruction
tangram7parts
.xcs
Application scenario
Laser processing (6min)
Machine & module
xTool D1 Pro
20WCompatible xTool Machine
M2
10W, 20WF2 Ultra UV
5WF2
15WP3
80WF2 Ultra
40WF1 Ultra
20WM1
5W, 10WD1
5W, 10W, 20WD1 Pro
5W, 10W, 40WP2
55WF1
10WS1
10W, 20W, 40WM1 Ultra
10W, 20WP2S
55WMaterial used
1/8"(3mm) Basswood Plywood
201
1948
Information
This wooden 5 piece puzzle not including the tray, is 80mm x 80mm, with the tray it is 100mmx100mm.
Instruction
1
Step1: Cut it out
Preview
Cut the file out. If you don't want to make a tray to go with it, delete the lower square and the outer square around the puzzle.
2
Step2: Put it together
Preview
If you didn't build the tray then your puzzle is complete. If you did then square A needs to be glued on top of square b, as marked in the file, with all the sides flush. Put the puzzle pieces in as shown in the picture. Your puzzle is now complete!
Comments
