Puzzle Automne - Laser Cut Wooden Autumn Fox Leaf Jigsaw Puzzle

Prepare your wood by applying a universal hairspray. 
This will allow the impression to be clean and without burrs.
Wait until the wood is dry before printing.

Prepare your wood by applying a universal fixative.
This will ensure the print is clean and smudge-free.
Wait until the wood is completely dry before printing.

Lancer l'impression avec le module jet d'encre

Start printing with the inkjet module

This step is optional, you can apply the foil to give a little shine to your puzzle.

This step is optional, you can apply the foil to give a little shine to your puzzle.

Once the printing is done, move on to laser cutting.
If you own the honeycomb I advise you to make your cut with it.
In order to properly match your cut to your image, make a "polygon" marking by going all the way around your sheet.
Then place your puzzle in the center.
The image is deliberately a little larger than the cutout to avoid a lag.

Once the print is complete, move on to laser cutting.
If you have the honeycomb, I recommend using it to cut
it.To properly align your cut with your image, mark the entire sheet with a polygon.
Then place your puzzle in the center.
The image is intentionally slightly larger than the cut to avoid any misalignment.

Then cut out the bottom of your puzzle

Now you can paste your outline to your background.
Once dry, you can complete the puzzle!

You can now glue your outline onto your background.
Once it's completely dry, you can complete the puzzle!