Report
![[Laser cut and engrave] CuttingBoardStand](https://image-res.xtool.com/resource/xtool/community/attachment/xtool-community/27c3b5e2-dbde-42fd-abd5-b8e007706e9b?x-oss-process=image/resize,w_1200,h_900,limit_0/interlace,1/format,webp/auto-orient,1)
![[Laser cut and engrave] CuttingBoardStand](data:image/gif;base64,R0lGODlhAQABAAAAACH5BAEKAAEALAAAAAABAAEAAAICTAEAOw==)
CuttingBoardStand
InstructionCuttingBoardStand
.xcs
Application scenario
Laser processing (7min)
Machine & module
xTool M1
10WCompatibles · 12
Accessories
xTool M1 Air Assist Set
xTool M1 Riser Base with Honeycomb Panel
Material used
1/8"(3mm) Basswood Plywood
173
1367
Information
This is a stand for cutting boards. Made from 3mm wood. To display your fabulous engraved wood projects.
Designed to hold a cutting board up to approximately 30mm depth.
Initial file created using boxes generator
https://boxes.hackerspace-bamberg.de/
and customized to add catch for the front edge of the board.
Instruction
1
Step1: Open File in XCS
See attached xcs file and open.
2
Step2: Prepare material and cut
- Lay out the material in the M1 workspace
- Secure using magnets/painters tape
- Turn on air assist and filters
- Cut material
3
Step3: Assemble and use
Preview
Preview
- The two pieces are sized to just slide together.
- No Glue is needed as long as the fit is snug.
- Place on a flat surface and add cutting board.
Comments
