Mini Rolling Pin #DerivativeCreation @xtools projects

I used Photoshop to design the rolling pin.

Set canvas size for 2.5" x 2"

If using text or graphics that need mirroring, make sure to mirror them (backwards) to prevent rolling pin being backwards 

Save file as a transparent PNG

Remove Baseplate from Machine

Attach Rotary Equipment.
    With the mini rolling pin, I had to move it to the smallest “A” section of the rotary.

Set Machine to “Laser Cylindrical”

Auto Measure distance with Red Dot to the highest point of the rolling pin.

You can also use a pencil and ruler to make a straight line on the rolling pin to see if it's straight in the framing.

Use the “Image” button to add your PNG to the work area.

Change “Bitmap Image” to “Black and White”

Set Engraving to:
   Power 50%
   Speed 50mm/s
   1 Pass
   Grayscale Bitmap Mode
   100 Lines per CM
   Bi-directional engraving mode
 

Use the framing feature to make sure that your engraving will remain on the rolling pin.

The pencil line you drew earlier also can be used to make sure that the rotary and rolling pin are straight

I found these pins to be smokier than other woods I have used.  Please make sure to vent properly and keep a close eye on the engraving process

Use warm soapy water to clean the rolling pin.

If you are using on art supplies such as clay or playdough, you should only use for that purpose…do not go from art to food and food to art.

If you are using for sugar cookies, it should remain a food tool.  Please note that due to the nature of engraved wood, these should only be used with food for short term purposes as dough can get caught in cracks and mold.