Report
![[Laser cut and engrave] Engraving wooden handle silicon baking spatula - Graver le manche en bois de la spatule silicon pour la patisserie](https://image-res.xtool.com/ali-res/community/making/51fc4fe0-f19e-49d6-869c-0fb411e0c9a4.jpg?x-oss-process=image/resize,w_1200,h_900,limit_0/interlace,1/format,webp/auto-orient,1)
Engraving wooden handle silicon baking spatula - Graver le manche en bois de la spatule silicon pour la patisserie
Instruction
spatule patisserie
.xcs
Show 1 more
Application scenario
Laser (10min)
Machine & module
xTool M1
10WCompatible xTool Machine
M2
10W, 20WF2 Ultra UV
5WF2
15WP3
80WF2 Ultra
40WF1 Ultra
20WM1
5W, 10WD1
5W, 10W, 20WD1 Pro
5W, 10W, 20W, 40WP2
55WF1
10WS1
10W, 20W, 40WM1 Ultra
10W, 20WP2S
55WMaterial used
1/8"(3mm) Basswood Plywood
3mm Basswood Plywood
22
1464
Information
Very easy to make!
For my 4 year old grandson who loves to bake, we bought him a silicon baking spatula.
An engraving on each side of the wooden handle to personalize his utensil.
As he recognizes his name, he won't mix up Grandma's spatulas which are much bigger.
And it's Grandfather (me) who enjoys the cookies!
-----------------------French version
Very simple to make!
For my 4-year-old grandson who loves to bake, we bought him a silicon pastry spatula.
An engraving on each side of the wooden handle to personalize your utensil.
As he recognizes his name, he will not mix Grandma's spatulas which are much larger.
And it's Grandpa (me) who enjoys the cookies!
Instruction
1
Step1
Preview
Preview
Place the handle of the spatula on the metal wedges. Fix it with 2 magnets. Make sure the wooden handle is level and horizontal on the honeycomb cutting table.
Position the wooden handle under the red laser spot to ensure a correct thickness measurement.
Make sure the font size does not exceed the edge of the wooden handle.
------------------French version
Position the handle of the tip on the metal cleats. Attach it with 2 magnets. Make sure that the horizontal level of the wooden handle is and that it is horizontal on the honeycomb cutting table.
Position the wooden handle under the red laser spot to ensure correct thickness measurement.
Make sure the font size does not exceed the edge of the wooden handle.
Comments
