Report

[Laser cut and engrave] Frame fixing jig! — Project made with S1 machine for Laser cut and engrave.

Frame fixing jig!

ID 15044

Instruction

Files

Original files

AuthorS1 · 1/8"(3mm) Pine Ponderosa Plywood

Add Make Profile

Same design, different machine, material, or any improvement · Earn 100 Credits

Tips for a great Make Profile →

3345

Information

      a project for fixating your jigs using Xtools Frame Fixing piece.

Works for all machines supperted by the Frame Fixing Piece.

Glue and patience is required :)

https://www.xtool.com/products/xtool-frame-fixing-piece-for-screen-printer

Bingo Party

jig

Instruction

Step1: Open project in XCS

Preview

Open project in XCS 2.0.

I have seperated the assets in different colors :

Blue = Score
Red = Cut
Green = Descriptions ( Not enabled in output )
Yellow = Score (Jig name, you can disable this or customise)

This project is set to use reference materials, so start changing your reference material to what you plan on making this in.

Step2: Gluing of first part

Preview

Glue top and connector togeather - alignment is key here - the engraved top and the scored bottom should be oppsosite of eachother.

Step3: Clamp them

Preview

MAke shure they are alligned - and then clamp them togeather

Step4: Glue next

Preview

Glue and clamp the Bottom part - use the scored line to allign - the scoreing on the bottom should face outwards for next step.

Step5: Glue connectors

Preview

Glue the 3 connectors ( I settled with 3 for having my honeycomb in top pisition on the riser ) - this is a variable step and should reflect the least amount of connecotrs used - - you might need more glued togeather to fit your needs.