Report

[Laser cut and engrave] How to engrave wooden hangers — Project made with xTool M1 machine for Laser cut and engrave.

How to engrave wooden hangers

Instruction

wooden_hangers

.xcs

Application scenario

Laser (10min)

Machine & module

xTool M1

10W

Compatible xTool Machine

10W, 20W

F2 Ultra UV

15W

80W

F2 Ultra

40W

F1 Ultra

20W

5W, 10W

5W, 10W, 20W

D1 Pro

5W, 10W, 20W, 40W

55W

10W

10W, 20W, 40W

M1 Ultra

10W, 20W

P2S

55W

Material used

1/8"(3mm) Basswood Plywood

3mm Basswood Plywood

215

4347

Information

      Want to laser engrave wooden hangers but don't know where to start. This How To will get you lasering wooden hangers like a pro!

The font I used can be downloaded from creative fabrica its called Willowshine.

30creatorschallenge

wedding

hangers

Instruction

Step1: Prepping

Preview

place the hanger in the laser just right under the red laser light.
shut the top and auto measure your material
Open the laser back up and move the hanger to the top of your honeycomb or base plate.

Step2: Design

Preview

Once I have my material inside I then that as a guide to where I want my text to go.
- size your text to your liking. you can even use the arching feature to make it arch if you like.

Step3: Laser

Preview

Because this is a small surface area, we want to make sure its exactly where we want it.
Use the framing feature to see exactly where the text will be engraved before you send it to the laser.
Once done check your settings!
Make sure your text is set to “engrave”
- I used 45 power and 70 speed and 200 lines
One this is done lasering you can clean it up with a baby wipe or some soap and water.

Comments