Report
![[Laser cut and engrave] Llavero Pikachu](https://storage-us.atomm.com/resource/xtool/community/attachment/xtool-community/6dcc381a-5fe3-4339-9f5f-bef38f6ac1ac.jpeg?x-oss-process=image/resize,w_1200,h_900,limit_0/interlace,1/format,webp/auto-orient,1)
![[Laser cut and engrave] Llavero Pikachu](https://storage-us.atomm.com/resource/xtool/community/attachment/xtool-community/6dcc381a-5fe3-4339-9f5f-bef38f6ac1ac.jpeg?x-oss-process=image/resize,w_200,h_150,limit_0/interlace,1/format,webp/auto-orient,1)
![[Laser cut and engrave] Llavero Pikachu](https://storage-us.atomm.com/resource/xtool/community/attachment/xtool-community/1b53e7c5-dee6-46e2-95b9-7347ffe520b6.png)
Llavero Pikachu
Pikachu sentado-llavero
.xcs
Application scenario
Laser processing
Machine & module
xTool M1
10WMaterial used
1/8'' (3 mm) birch plywood
7
142
Information
I cut out an image of Pikachu and mirrored it horizontally so that I could glue both and that it could be seen on both sides
Comments
