Report
![[Laser cut and engrave] Beleuchteter Spiegel](data:image/png;base64,iVBORw0KGgoAAAANSUhEUgAAAAoAAAAKCAYAAACNMs+9AAAAAXNSR0IArs4c6QAAABdJREFUKFNjZCASMBKpjmFUId6QIjp4AAppAAuXjCs4AAAAAElFTkSuQmCC)
![[Laser cut and engrave] Beleuchteter Spiegel](https://storage-us.atomm.com/resource/xtool/community/attachment/xtool-community/25e8dfe2-da58-4ab6-87a2-7b0620b0625e.jpg?x-oss-process=image/resize,w_200,h_150,limit_0/interlace,1/format,webp/auto-orient,1)
Beleuchteter Spiegel
Instruction
Spiegelportrait
.xcs
Application scenario
Laser processing
Machine & module
xTool F1 Ultra
20WMaterial used
Glass mirror
5
399
Information
The idea was first to engrave a mirror with a portrait. Since the mirror was now partially translucent, I wanted to illuminate it from behind.
Instruction
1
Step1
The idea of the portrait to the illuminated mirror.
I had a portrait improved with AI support (grayscale and contrast). Then the portrait was lasered mirror-inverted onto the back of the mirror. Then a matching box was built from beech strips, a back wall was placed on top with plywood and the complete box was glazed. glued a short LED strip to the upper and lower inner wall of the box, prepared it for a 12V power supply and finally glued in the mirror.
Comments
Remixes
xTool Supplies Used in This Project
Related collections
License
This work contains AI-generated content.