DisplayShelf for building brick speed cars

Cut materials on the machine.  There's two layouts each sized to a 12"x12" sheet.  

I added a .083mm kerf to the project so that the joints should fit nice and tight.

For assembly, the first step is to assemble the front edge to the shelf.  Repeat 5 times.

Ensure to add wood glue to the tabs.  If the pieces are tight, I use a hand clamp to squeeze the parts together.  Using a hammer or a rubber mallet works, but the hand clamp wont cause damage like the hammer/mallet.

Assemble all 5 shelves to one vertical side.  

Assemble the remaining side.