Herb THE berT

Report

[Laser cut and engrave] Spring Flowerbox — Project made with xTool M1 machine for Laser cut and engrave.

Spring Flowerbox

Instruction

flower box

.xcs

Application scenario

Laser (180min)

Machine & module

xTool M1

10W

Compatible xTool Machine

New

10W, 20W

F2 Ultra UV

15W

80W

F2 Ultra

40W

F1 Ultra

20W

5W, 10W

5W, 10W, 20W

D1 Pro

5W, 10W, 20W, 40W

55W

10W

10W, 20W, 40W

M1 Ultra

10W, 20W

P2S

55W

Material used

1/8"(3mm) Basswood Plywood

719

9093

Information

      this is my recycle project :)
here i created a small box and filled it with old jars that i don't need anymore
All the wood used was left over wood from previous projects

Instruction

Step1: let's create the box

Preview

we create the floor and the two side walls
i have adapted the dimensions to the glasses i have

Step2: we build the fence

Preview

a rectangle and then select edit node
add another node and drag the two corners down to create a point at the top

duplicate the slats from the fence

Step3: cross brace

Preview

here it is important not to make them as wide as the ground or all the slats of the fence
on each side leave out the thickness of the wood in my case it was 3mm

Step4: let the grass grow

Preview

create a rectangle and click on edit node
add many nodes in the top bar
now you can customize the nodes so that it looks like grass
i recommend setting the nodes to total asymmetry

Step5: flower power

Preview

5 More images

create a circle that is already more in the direction of a leaf
adjust it with the nodes until you are satisfied
make a copy and adjust both as you like it
copy both twice and rotate the copies to each other
select all the leaves and connect them to each other
create another circle for the center
select the pattern on the left side
place the circle and the pattern on top of each other and substract them