Report
![[Laser cut and engrave] Wooden welcome sign with glass jar and green plant decoration](https://image-res.xtool.com/resource/xtool/community/attachment/xtool-community/0d1f0edb-6b01-4e02-86c1-3ebf38c2c684?x-oss-process=image/resize,w_1200,h_900,limit_0/interlace,1/format,webp/auto-orient,1)
![[Laser cut and engrave] Wooden welcome sign with glass jar and green plant decoration](data:image/gif;base64,R0lGODlhAQABAAAAACH5BAEKAAEALAAAAAABAAEAAAICTAEAOw==)
House Plant
Instructionhousepot
.xcs
Application scenario
Laser processing (25min)
Machine & module
xTool S1
20WMaterial used
birch
glue
cedar
117
1056
Information
A holder for a house plant made from birch and cedar
Instruction
1
Step1
Preview
Preview
Preview
Preview
- This project starts with a simple triangle from the shapes list
- Once resized it is doubled and with the use of the combine and subtract features it is shaped into a roof of a house.
- When these pieces are ready the front, back sides and bottom are laid out for size to create a small box
- When all settings are adjusted the first part of the project is sent to be processed.
- This is done by itself as it is 5/8" thick cedar so settings are different then the birch.
- The wording Welcome is added for the front piece, this word also gets offset to create a score line.
- When this is complete the pieces cut from the birch are then processed.
- With all pieces cut the assembly can begin, it is a box added to the roof line
- When all is dry it is ready to be enjoyed.
Comments
