Report

[Laser cut and engrave] Spooky Halloween Pumpkin — Project made with xTool S1 machine for Laser cut and engrave.

Spooky Halloween Pumpkin

Instruction

HalloweenPumpkins2

.xcs

Application scenario

Laser processing (30min)

Machine & module

xTool S1

20W

Compatible xTool Machine

New

10W, 20W

F2 Ultra UV

15W

80W

F2 Ultra

40W

F1 Ultra

20W

5W, 10W

5W, 10W, 20W

D1 Pro

5W, 10W, 20W, 40W

55W

10W

10W, 40W

M1 Ultra

10W, 20W

P2S

55W

Material used

1/8"(3mm) Basswood Plywood

168

2786

Information

      This laser-cut file showcases a pumpkin decorated with a flying bat and thorny branches, bringing a dark and mysterious vibe to your Halloween setup. Designed for use with materials such as plywood, MDF, acrylic, or paper, this piece is perfect for spooky wall or window decor.

Key Features:
5-layer design: Ensures maximum detail and accuracy.
Versatile materials: Cut from a wide range of materials, including wood, MDF, acrylic, paper, and cardboard.
Easy to assemble: Detailed instructions are below.
Scalable to your desired size.
Perfect for both beginners and experienced makers.

Download this design and start creating your own enchanted Halloween Pumpkin!

Instruction

Step1: Using xTool Creative Space

Preview

Switch on the machine, open xTool Creative Space on your computer, drag in the required XCS file, 300*600*3mm Plywood board into the machine, refresh the page, click on ranging, adjust the parameters, and get ready for cutting. When using the S1 machine, you need to turn on the air pump to prevent the board from yellowing and discoloring during laser cutting.

BLACK LAYER

Make sure you opened "Layer and Object List” by clicking on the Icon on the bottom left of the screen.
Select the black layer (this layer contains the path for cutting).
Set the processing type of the black layer to Cut.
Click on “EasySet panel” to open the power and speed settings for the selected layer.
Set the Power (S1-20w: 100)
Set Speed (S1-20w: 5)
Set Number of Passes (S1-20w: 1)