Wooden Easter Bunny Treat Board

📌 Recommended Materials

Anko (Kmart/ Target) - Acacia Bunny Serving board

3mm Birch or Pine Plywood 

Wood Stain / Cabots Touch up Stain Pen

Acrylic Paint / Poska Markers

Gorilla Wood Glue

🪚 Suggested xTool Settings

(Reference only — always test on your material first)

Score: Baseplate removed, Edible Oil Coated Acacia Wood

Cut: 3mm Birch Plywood

🧩 Assembly Steps (Detailed Process)

Remove Baseplate, place honey comb on the top shelf of the riser base.

You will need to lift the board higher I used another serving board underneath due to the height the bunny ears should be able to slide underneath until they hit the back orange acrylic of the riser base.

Auto Measure should work if its high enough else manually measure for focal distance

I have purchased a couple of these bunny boards and the dimensions are slightly different so after you have set your focal distance before you process the score layer you may need to move your objects around the board slightly before scoring (ungroup the objects before actioning this.

Turn output on only for the score layer select Edible Oil Coated Acacia Wood -> frame -> process

Turn off output on score layer -> Move objects off laser bed canvas and change with cut layer objects.

Insert Plywood - Turn on Processing for cut layer -> Change material to 3mm Birch Plywood -> Frame -> Cut 

I painted the ears and carrot with Poska Paint Pens, stained the egg holder & eye with Cabot’s Touch up stain pen In golden maple & black.

Once paint is dried glue all items down onto the serving board I use Gorilla Wood Glue.

https://www.tiktok.com/@zer0mondays/video/7622462819526659348?is_from_webapp=1&sender_device=pc&web_id=7612253831859504658

https://pin.it/4Jc2TpTLa