Report
![[Laser cut and engrave] Laser Cut Wooden Happy Easter Bunny Table Decoration](https://storage-us.atomm.com/resource/xtool/community/attachment/xtool-community/5e28d7f6-66d3-4a1e-a81c-769f72e6352f.jpg?x-oss-process=image/resize,w_1200,h_900,limit_0/interlace,1/format,webp/auto-orient,1)
Bunny holding a Happy Easter sign
Instruction
Happy Easter 3D sign 3mm
.lbrn2
Show 1 more
23
Information
Looked fun to make!
Instruction
1
Step1: Cut all pieces
Preview
Cut all pieces and lay them out
2
Step2: Glue on feet face and hands
Preview
Preview
Preview
Preview
Glue on feet, make sure the bottoms line up.
Glue on hands (paws) line up the top to the backing.
Glue on face. line up the edges.
3
Step3: Line up the Sign
Preview
I put a scoring line on each leg to line up the bottom of the sign.
Glue it into place.
4
Step4
Preview
Preview
Preview
Preview
Glue the bunny assembly into the base and glue in the eggs. The eggs are able to go on either side. Just make sure they point outwards.
5
Step5: Scaling
Preview
As you can tell some of the pieces are really small. You can upsize the whole thing.
Just make sure to set the width of the slots in the base to the thickness of your wood.
If you wanted to do this out of 6 mm wood increase the size of all pieces by 200%…
I you have any questions leave a comment and I'll get back to you with an answer.
Comments
