Report

Laser Engraved Heart Shaped Pet ID Tags with Blue Paw Design

Atomm Featured

Instruction

pattechienvitrailplaquecollier

.xcs

Application scenario

Laser processing

Machine & module

xTool F1 Ultra

20W

Compatible xTool Machine

F2 Ultra UV

F2 Ultra

40W, 60W

5W, 10W

D1 Pro

2W, 40W

2W, 10W

2W, 10W, 20W, 40W

F2 Ultra (Single)

60W

Material used

1.8mm Round Stainless Steel Dog Tag

219

3637

Information

      Colored stainless steel engraving of a dog's paw, stained-glass style, with a gradient of blues. The paw's contour settings can be adjusted to create a 100% blue light image, making it suitable for use with machines not equipped with an IR laser.

Settings for dark, almost black engraving without burning stainless steel with the fiber laser.

---

Engraving on stainless steel in color of a dog's paw type "stained glass" with a gradient of blues.
It is possible to adapt the settings of the contour of the leg to make it 100% diode in order to achieve it with machines not equipped with the IR laser.

Settings for dark, almost black engraving without burning stainless steel with the fiber laser.

animal identification

Instruction

Step1: Colored paw side engraving

Place your medal and focus it.Make
sure it's clean and free of fingerprints.

Position the design; feel free to use the frame to position it exactly where you want it.

Start engraving and admire!

P.S.: You can test changing the outline engraving to make it 100% blue light and ensure the design is compatible with all machines that don't have the IR module.

Place your tag and focus.
Make sure it is clean, without fingerprints.

Place the design, feel free to use the framing so that it is where you want it to be.

Start the engraving and admire!

Ps: You can do tests to change the engraving of the outline in order to make it 100% diode and that the design is compatible with all machines that do not have the IR module.

Step2: Dark/black fiber laser engraving - Gravure sombre/noire laser fibre

The most important thing here is to add 5mm to your focus distance.
Once you have reached this 5mm, you'll need to be sure to use the "framing" function to correctly position the medal.
Adding 5mm to the distance will distort the placement based on the photo.
Once the framing is complete and the medal is correctly positioned, you can start engraving!

Don't hesitate to rinse and clean the engraving thoroughly afterward to remove any deposits.

The most important thing here is going to be to add 5mm on your focus distance.
Once these 5 mm have been reached, it will be necessary to use the "frame" function in order to position the medal correctly.
The fact that we add 5mm to the distance then distorts the placement from the photo.
Once the framing is done and the medal is well placed, you can start the engraving!

Do not hesitate to rinse and clean the engraving well afterwards to remove any deposits.

Comments