Custom Kids Drawing Mom Pendant Necklace

1. Place the plywood on the slats in the machine. 
2. Open the file and place the design on the wood using the cameras.
3. Set the black cut lines to 40 Power and 15 Speed for Cut. I only need 1 Pass at this setting.
4. Measure the distance. I got 3.15 mm as my distance for 3mm plywood sheet on top of the slats.
5. Click the green Process button on the top right of the screen.
6. A preview will be shown. Click the green Start button (top right) to send it to the machine.
7. Press the button on the P2 machine to start.

1. Grab some metallic silver acrylic paint and a make-up sponge.
2. Dab the sponge in the paint and dab it evenly all over the cut out piece.
3. Allow to dry.

1. Apply UV resin on the top layer and cure for 4 minutes.
2. Flip over and repeat step 1 for the back.
3. Apply UV resin on the sides (outside and inside) and cure.

I had a sterling silver necklace available and added the pendant to that.

One day I hope I am fortunate enough to own the F2 Ultra, so that I can remake this project in a metal material instead of painted wood.