CarvingCreatives IG

Report

[Laser cut and engrave] Forest animal slate coasters set featuring bear, deer, and turkey — Project made with S1 machine for Laser cut and engrave.

[Laser cut and engrave] Forest animal slate coasters set featuring bear, deer, and turkey — Project made with S1 machine for Laser cut and engrave.

[Laser cut and engrave] Forest animal slate coasters set featuring bear, deer, and turkey — Project made with S1 machine for Laser cut and engrave.

[Laser cut and engrave] Forest animal slate coasters set featuring bear, deer, and turkey — Project made with S1 machine for Laser cut and engrave.

[Laser cut and engrave] Forest animal slate coasters set featuring bear, deer, and turkey — Project made with S1 machine for Laser cut and engrave.

[Laser cut and engrave] Forest animal slate coasters set featuring bear, deer, and turkey

[Laser cut and engrave] Forest animal slate coasters set featuring bear, deer, and turkey

[Laser cut and engrave] Forest animal slate coasters set featuring bear, deer, and turkey

[Laser cut and engrave] Forest animal slate coasters set featuring bear, deer, and turkey

[Laser cut and engrave] Forest animal slate coasters set featuring bear, deer, and turkey

Wildlife Slate Coaster 4 Pack

Instruction

WildlifeCoaster4Pack.xcs

WildlifeCoaster4Pack

.xcs

Application scenario

Laser processing (37min)

Machine & module

xTool S1

20W

Compatible xTool Machine

P3

F2

F2 Ultra UV

F2 Ultra（Single）

F2 Ultra

F1 Ultra

F1

F1 Lite

P2S

P2

M1 Ultra

M1

D1 Pro 2.0

D1 Pro

D1

Laserbox

M2

Material used

Rock Stone

gift

1221

6802

Information

      Forest animal stone coasters set featuring bear, elk, deer, and turkey.

Instruction

1

Step1

Place the 4X4 stone coasters onto the honeycomb insert.

2

Step2

Move your crosshairs over the center of the coaster and mark your distance using the auto-measure feature.

3

Step3

Mark your working area using the rectangle selection and moving the crosshairs to two opposite corners, repeat for the next 3 coasters.

4

Step4

Import the file or SVG and resize it as needed for your material. Note the image is inverted for a cleaner finished project on the stone.

5

Step5

Adjust settings to desired power/speed.

6

Step6

Run the project- usually around 10 minutes time each, 40 minutes with the included settings for the 4 pack. TIP- place the coasters close together on the honeycomb to avoid lost time in laser travel.

7

Step7

Finish with a light coat of mineral oil or clear coat to make the engraving really stand out.

Comments

Remixes

License

This work contains AI-generated content.

You may also like