Report

[Laser cut and engrave] Schieferuntersetzer Set mit Fuchs Motiven — Project made with xTool F1 machine for Laser cut and engrave.

Fox Wildlife – Slate Coaster Engraving Set

Instruction

Fuchs-4er-Set-Schiefer

.xs

Application scenario

Laser processing

Machine & module

xTool F1

2W, 10W

Compatible xTool Machine

3W, 10W, 20W

F2 Ultra UV

5W, 15W

5W, 80W

F2 Ultra

40W, 60W

F1 Ultra

20W

5W, 10W

2W, 5W, 10W, 20W

D1 Pro

2W, 5W, 10W, 20W, 40W

55W

2W, 10W, 20W, 40W

M1 Ultra

10W, 20W

P2S

55W

F2 Ultra (Single)

60W

Material used

Rectangular Blank Rock Slate

Information

      A set of four detailed fox designs created for laser engraving on natural slate. Each motif features a different pose and combines the fox with elements of its natural habitat.

Important: The designs should be engraved as an inverted / negative image so the light areas are engraved into the dark slate.

The slate shown in the photos was engraved without any pre-treatment or post-treatment. For an even deeper dark tone and stronger contrast, I achieved the best results by applying natural slate oil after engraving.

Instruction

Step1

Important: The design must be engraved as an inverted / negative image so that the light areas of the artwork are engraved into the dark slate.

The slate shown in the photos was engraved without any pre-treatment or post-treatment.

For an even deeper and richer finish, I achieved my best results by applying slate oil after engraving. It enhances the natural dark color of the slate and makes the engraved design stand out beautifully.

Comments