![[Laser cut and engrave] Metal Skull Design Composed of Multiple Small Skulls Artwork](https://storage-us.atomm.com/resource/xart/result/686683/dbf06016-1969-46ce-83bd-dc5788b70e44.png?x-oss-process=image/resize,w_1200,h_900,limit_0/interlace,1/format,webp/auto-orient,1)
Skull and Cross Skills
Instruction
Information
I decided to test the capabilities for fine work of the F2 Ultra on a black coated Dog Tag. I came up with this design as it graduates sizes and therefore would indicate how fine I could get the detail.
Instruction
Step1
As this was to test the machines capabilities with the basic settings of the software the set up is easy.
Step 1: Open X tool studio and select a new project.
Step 2: Import the image for the file.
Step 3: click on the image and select Edit from the top tab.
Step 4: Select AI background removal, At this point I personally choose to switch to manual and remove the background elements. (Note the image I created was background free, which sadly leaves checkers in the studio software, it appears unable to recognise an absent background.)
Step 5: once the image is cleaned, select it and set the height to 20mm, leaving the aspect ratio locked.
Step 6: Select the material as black coated military style pendant.
Step 7: Leave all settings given as given, except the dot duration, increase this to 400 as it gives in my opinion a better result. Though as machines vary may not on yours.
Step 8: Set focus and position of the engraving.
Step 9: Process and run the fils.
