Report
![[Laser cut and engrave] Leather Keychain with Laser Engraved Anchor Design](https://storage-us.atomm.com/resource/xtool/community/attachment/xtool-community/942cf8d3-4b56-4f26-9736-15e3588a65c7.jpg?x-oss-process=image/resize,w_1200,h_900,limit_0/interlace,1/format,webp/auto-orient,1)
Leather challenge coin holder 40mm
Instruction
challenge coin 57mm
.xcs
Application scenario
Laser processing
Machine & module
xTool d1 pro
5W
xTool M1
10W
xTool F1 Ultra
20W
xTool D1 Pro
10W, 20W
xTool P2
55W
xTool S1
10W, 20W, 40W
xTool M1 Ultra
10W, 20W
xTool D1
5W
xTool F1
10WCompatibles · 6
Material used
Deep Brown Top Grain Cowhide Leather
Black Top Grain Cowhide Leather
Olive Top Grain Cowhide Leather
3
Information
A leather coin holder to protect your challenge coin whilst in your pocket.
Instruction
1
Step1: cut out on laser
Preview
using full grain leather cut out the stitch holes and then the outline of the challenge coin slip.
ideal leather thickness is 1.4mm but you can use up to 2mm medium temper full grain leather.
2
Step2: gluing the 2 parts together
glue along the stitch holes on the outer side of the holes, making sure not to get too much glue in the holes. align each part up so that the holes are aligned.
3
Step3: stitching and burnishing
Stitch together using 0.6mm thread of your choice. the best stitch to use is the saddle stitch. once stitched together, sand, bevel and burnish your edges and you are done!
Comments
