![[Laser cut and engrave] Laser Cut Wooden Christmas Scene with Santa and Dog Pulling Sleigh](https://storage-us.atomm.com/resource/xtool/community/attachment/xtool-community/9e4edae7-f1e4-4078-9bfe-a436f8995e31.jpg?x-oss-process=image/resize,w_1200,h_900,limit_0/interlace,1/format,webp/auto-orient,1)
4 layered Laser Cut Wooden Christmas Scene with Santa and Dog Pulling Sleigh
Information
I made a 4 layered wooden cut out with a dog pulling Santa in a sled.
Prompt was: A bouvier des Flandres hairy dog with pointy ears and a Santa hat, pulling a sled in the snow with Santa Clause in the sled.
Instruction
Step1
Inserted the image into Studio and did an outline. Then inserted a square and attached it to the outline and united it. Then inserted another box for the frame. Grouped both image and out line/box and set the settings.
Step2
Inserted a tree from the shape section in Studio and copy and pasted them to make different sizes, by unlocking the trees. I set them next to each other and put the setting for cut instead of engrave. Then i attached them, by clicking the unite button.
Inserted another box and made it the size as the inner box from the dog/Santa image.
Used the Unite button to attach it all together (trees and box)
Then inserted another box the same size as the outer box from the dog/Santa.
Set the settings to cut and grouped them.
Inserted a couple of other boxes, to made the back and the frame, the same sizes as the other boxes.
Step3
Once engraved and cut out, i pained the trees green.
Then used double sided tape to stick each layer together.
