HomeTemplatesDecorHome Decor
kim_natale
Report
Laser cut and engrave
Project made with xTool D1 Pro machine for Laser cut and engrave.
Project made with xTool D1 Pro machine for Laser cut and engrave.
Laser cut and engrave
Project made with xTool D1 Pro machine for Laser cut and engrave.
Laser cut and engrave
Project made with xTool D1 Pro machine for Laser cut and engrave.
Laser cut and engrave
Laser cut and engrave
Laser cut and engrave
Laser cut and engrave
Laser cut and engrave
Laser cut and engrave

Simple Coasters With Animals

Instruction
Animal Tiles.xcs
Animal Tiles
.xcs
Application scenario
Laser (120min)
Machine & module
xTool D1 Pro
20W
Material used
Ceramic Tile
223
2783
Information
      Engraved animals on ceramic tiles for use as coasters. I could also use the tiles in a tiling project.
Instruction
1
Step1
Preview

Position a ceramic tile in your laser with the positioning red cross about 1/4 inch down and in from the edge of the tile.

Note: The files are designed for a 4x4 tile. The images may be resized for any size tile without losing the sharpness of the edges because they are vector images.

2
Step2

Choose the canvas you want (there are 4 images) and check the framing.

Start the engraving.

3
Step3

The tile will have the ceramic coating chipped off and the base color of the tile will be exposed as shown.


4
Step4

Spray paint the entire tile with the color of your choice (I used black gloss). Immediately wipe the tile with a paper towel to leave the paint only in the engraved area.

Comments
Remixes
xTool Supplies Used in This Template
xTool D1 Pro
xTool D1 Pro