HomeTemplatesOffice & StationeryStationery Supplies
jme9626
Report
Laser cut and engrave Elegant spiral leather notebook with engraved logo design
Project made with xTool F1 machine for Laser cut and engrave.
Laser cut and engrave Elegant spiral leather notebook with engraved logo design
Laser cut and engrave Elegant spiral leather notebook with engraved logo design

Leather Cover for Mead 5 1/2" by 3 1/2" Mini Spiral Book

Instruction
MeadBook.xcs
MeadBook
.xcs
Application scenario
Laser processing (30min)
Machine & module
xTool F1
2W, 10W
Accessories
xTool F1 Slide Extension
Material used
Veg-tan Leather
13
191
Information
      This file will help your create a leather cover to replace the cardboard one and make it custom.

You will need a 5 1/2" x 3 1/2" Mead Spiral Notebook
Some Leather (Veg-tan if using F1)
Slide Extension Table
Instruction
1
Step1: Notebook
Preview
Preview
Preview

You first need to take the spiral ring tube off.

Use two clamps to hold pages together.

Carefully unhook one end of the spiral.

Then spin the spiral until it all comes off.

2
Step2
Preview

Place your leather in the machine, cut and engrave you image.

3
Step3: Add Spiral
Preview

Take a spacer of paper or cardboard and place on top of leather before adding clamps back on so you don't dent the leather.

 

Then spin the spiral back on.

Using a pair of needle nose pilers bend and put the hook back on.

4
Step4: Your Done!
Preview
Comments
Remixes
xTool Supplies Used in This Template
xTool F1 Slide Extension
xTool F1 Slide Extension
xTool F1
xTool F1

License

CC0