Report
![[Laser cut and engrave] Handcrafted leather case for AirPods with snap button closure](https://image-res.xtool.com/resource/xtool/community/attachment/xtool-community/a8ecc9e7-0bee-40bf-8fa6-86286c2e9f8f?x-oss-process=image/resize,w_1200,h_900,limit_0/interlace,1/format,webp/auto-orient,1)
Leather Apple Air Pods Case
Instructionairpodscase
.xcs
Application scenario
Laser processing
Machine & module
xTool F1
2W, 10WAccessories
xTool F1 Slide Extension
Material used
Leather
66
371
Information
This file will create a basic leather air pods case.
You will need 2-3 oz (1mm) thick leather, and a line 20 snap
If using a F1 you will need the slide extension
Instruction
1
Step1: Selecting Leather
If using a F1 I recommend a 2-3 oz leather, if you are using a different machine you can chose a leather up to 4-5oz.
2
Step2: Its a Snap
Now if you are using a snap, set your snap head on the front flap and the back part of the snap on the opposite side.
3
Step3: Stitch time
Now fold your piece in half and line up the stitch holes. Make sure you are stitch the case inside out.
4
Step4: Turn inside out
When you finish both sides of the stitching, turn your case inside out and you should be complete.
Comments
