Report
![[Laser cut and engrave] Kid's Menorah](https://image-res.xtool.com/resource/xtool%2Fcommunity%2Fmaking%2Fb26fd5ae-8143-4961-bc07-a7f60f14f5a6%2FIMG_1598.jpg?x-oss-process=image/resize,w_1200,h_900,limit_0/interlace,1/format,webp/auto-orient,1)
Kid's Menorah
Instructionmenorah
.xcs
Application scenario
Laser (30min)
Machine & module
xTool S1
40WCompatibles · 11
Material used
1/8"(3mm) Basswood Plywood
3mm Basswood Plywood
45
505
Information
Menorah that can be colored (or not) and placed in a child's window with no worry of flame.
Instruction
1
Step1: Place and mark your space
This is sized for a 12x12 piece of plywood. If you size to fit, it will adjust the button connector which need to remain the correct width in order to fit the thickness of the material you plan to use.
2
Step2: Button cutting
I attempted to force the machine to cut the button tabs rectangle first in order to get a clean cut prior to the circle being cut. By layering the rectangles on layer 2 and the circles on layer 3 this helped, but did not completely eliminate the premature dropping of some of the buttons on the honeycomb.
Comments